Best usb audio interface in 2018

A small song-writing team would likely need up to eight. But engineers that actually record bands will be wanting something more in the sixteen count range. However, instruments as complicated as an electronic drum kit might want eight counts on their own, and so it is very important to consider your I/O count needs when selecting your interface. Input Channel Types

We have addressed the most significant features to keep in mind when acquiring your own audio interface. Now one should consider that in order to avoid the necessary addition of a multi -channel mic preamp, the end result may be fewer inputs than needed or anticipated. This is due to the fact that though a typical interface may have as many as sixteen inputs, only a number of these may actually be microphone inputs.

These could range anywhere between two to eight. There are also other types of inputs to consider for specific needs, such as DI inputs for guitar or bass players, or MIDI inputs for keyboardists. So it is important to understand that the number of inputs listed on the product are not necessarily the actual number that you can make use of.

An audio interface also known as a digital audio interface acts as a hub that helps you connect all the external devices to your music production laptop (Perhaps a Macbook Pro) or desktop. An audio interface also comes with it’s own built in sound card that completely takes the load away from your internal soundcard of your computer. Especially from your overall CPU.

One thing I would like to clear is preamp (Basically amplifies songs) and an audio interface are two different things. Most audio interfaces come with their very own preamp. However, if you get a preamp on it’s own, the sound especially for vocals is super clear. You can do the same with an audio interface but you need to put in the extra effort like adjusting gain, adding a noise gate plugin, etc to get rid of that ‘hissing’ noise. There are ways to do it but with a preamp, it usually gets taken care of on it’s own.

It all depends on what you are trying to connect to it. Like for Studio Monitors, you would need XLR cables. For a MIDI controller, a USB might do the trick but if you are just trying to connect an audio interface to your computer, USB is just fine. In fact, almost all audio interfaces today (The popular Presonus Firebox for example) are all USB ready. Just plug and play.

To get going, get a 2 x 2 audio interface. This kind of audio interface gives you two xlr outputs to connect your studio monitors, one input for your mic and another for your midi keyboard. Perfect to power a pair or studio monitors, a mic and a keyboard. However, just goes it says 2×2 doesn’t mean it has all these essential 4 inputs. It’s always best to look at the images of the products too.

One thing to keep in mind is to get professional industry standard sound, the output of your audio interface should be at 24-bit/192kHz. You can get something with a lower output but only if you are a super beginner and don’t have the budget to invest slightly higher. Once you do get a lot better, then invest in an audio interface with a 24-bit/192kHz output. This is a secret that a lot of newbs don’t know and therefore they stay well . . . newbs.

A lot of people use mixers with an audio interface to make their sounds super professional and high quality. You can easily connect an audio interface and mixer together with an additional XLR cable or in some cases, through USB. Whether it’s Behringer, Mackie, Summing, Presonus or any popular audio interface that is out there, you can definitely use them with a mixer.