Future powertrains iav sees huge potential with 3d-printed pistons engines content from wardsauto

But IAV Automotive Engineering is piloting the far-out concept of 3D-printing metallic pistons, a process that would revolutionize the production of a vital powertrain component while making it lighter, more resistant to high temperatures and faster to manufacture.

While today’s pistons are solid due to the casting and forging process – with the rare exception of a cooling channel integrated within the crown, behind the ring of some diesel pistons – IAV demonstrates that pistons don’t have to be solid.

Instead, with 3D printing, a piston can be created one layer at a time through additive manufacturing, and a super-strong honeycomb lattice can replace the solid material, reducing mass about 25% while also optimizing the cooling of critical areas, reducing friction and parasitic losses and improving material properties 75% compared with traditional pistons.

“When this is lighter,” he says, displaying the honeycomb structure in a 3D-printed piston prototype, “the connecting rod is lighter, the counterweights on the crankshaft are lighter. If they’re lighter, the crank itself can get lighter, less loads are going into the bearings and there’s less friction.”

Within two years, as 3D-printing becomes less expensive, Dolan says certain diesel engine pistons facing “far more extreme boundary conditions,” particularly in commercial vehicles, could be 3D printed for series production because of the thermal management and structural integrity benefits of the new-age manufacturing process.

“We are currently engaged in development projects for both compression-ignition (diesel) and spark-ignition (gasoline) engines and are using 3D-printed pistons to both save time in development test cells and to help develop this process further,” he tells WardsAuto.

With conventional casting, it takes about 12 weeks to manufacture a piston for an engine-development program and about another week to have it machined. With 3D printing, a piston can be manufactured and machined in less than a week for combustion testing within a prototype cylinder, Dolan says.

Along the way, in that testing process, engineers can adjust compression ratios, change bore offsets and vary the flow of cooling oil. And with 3D printing, a manufacturer can quickly fabricate a different piston in the middle of that testing without having to wait 12 weeks for it to arrive.

The more sophisticated the piston, such as a heavy-duty diesel engine requiring a complex bowl to facilitate optimum combustion, the greater the need for a reduction in time to build prototype parts, says Thaddaeus Delebinski, IAV’s business unit director for diesel engines.

“It takes time to cast (a piston) and do refinements, and it takes more time to do it again,” Delebinski says. “If you can just update the design, then print the piston and have your different design installed within weeks, it’s a big advantage.”

The hotter a piston gets, the bigger it gets and starts to lose its geometry, causing it to grab the cylinder wall. So the ability to create cooling channels within a piston while it is being 3D printed is groundbreaking. “When you can incorporate advanced cooling features in here, you win,” Dolan says.

The supplier sees these gains as important because cylinder heads face extreme thermal and mechanical loads. Plus, demand for increasing power density from engines combined with the use of alternative fuels such as compressed natural gas results in far higher peak cylinder pressures.

But for now, the focus is on pistons, and Dolan says IAV will have a 3D-printed piston running in a prototype diesel engine fairly soon. IAV is not a manufacturing company but instead helps automakers and suppliers design, test and analyze new technologies.